Play button during FAQ

I: Location play button cloth uneven thickness.

II: thick cloth

III: play button pressure is not enough

IIII: compressed air supply instability

IIIII: Workers put the button is incorrect

IIIIII: Press the play button when the foot is not enough time

B: paint off

1, hit the button too much pressure.

2, cloth buttons below the requirements resulting in claw foot bulge outward.

3, the upper and lower mold misalignment or locked.

4, play button molds incorrect or damaged.

5, the inner wall of the washing machine with the laundry test button over collision.

6, the laundry process mixed with hard objects inside the machine.

7, Paints and buttons firmly enough.

C: dew claws

1, position play button uneven thickness of the fabric

2, before and after the release button is about to pull clothes

3, fabric texture is too hard

4, workers put the button is incorrect

5, the seam-line play button

6, automatic machine hopper release button too

7, upper and lower mold eccentric

8, mold damage already

9, there is no proper storage button

10, had deformed claw feet